Investigating the geometry and mechanism of folding in Sulabder anticline (SW Iran)
Subject Areas :
Mehdi
Yosefi
1
F.
Esfahani
2
Seyd Morteza
Moussavi
3
Keywords: Sulabder anticline, Geometric analysis, Fault-related folding, Folding style.,
Abstract :
Calculating the amount of shortening, the angle between ridges, the slope of the main thrust and the percentage of thinning of the front ridge compared to the back ridge in the middle and northwestern parts of Sulabder anticline shows the folding style related to fault propagation in these parts. The calculation of these geometrical parameters in the south-eastern part of the Sulabder anticline also shows the faulted detachment folding style. The change of folding class from 1c to 2 and 3, as well as the change of fold style from detachment folds to fault propagation style, are a sign of increased shortening, deformation progress and evolution of folding from the south-eastern part. This represents that in the initial stage the thrust fault system belongs to the middle and north-western parts, which are in the developed stages of the thrust fault system. The interpretation of seismic sections perpendicular to the Sulabder anticline in different sections shows that the Sulabder anticline in a raised wedge form is higher than the adjacent structures due to the action of the thrust faults on the northern and southern edges. In the Solabdar anticline, the performance and mobile behavior of marl-shale units of Pabdeh and Gurpi formations, due to its high thickness and formable rheology as an intermediate separation horizon, create different folding styles at the top and bottom of this unit. It also caused displacement in the axis of the upper and deeper parts of anticlines.
حاجی علی بیگی، ح.، علوی، ا.، افتخار نژاد، ج.، مختاری، م. و آدابی، م.ح.، 1393. تحلیل هندسی چین‌خوردگی مرتبط با گسلش، مطالعه موردی :تاقدیس کاسه ماست، جنوب منطقه لرستان. فصلنامه علوم زمین، سازمان زمین¬شناسی کشور، 9، 10-3.
دریکوند، ب.، علوی، س.ا.، حاجی علی بیگی، ح. و عبداللهی فرد، ا.، 1395. تحلیل هندسی و جنبشی تاقدیس زیلویی در بخش شمالی فروبار دزفول، جنوب باختر ایران. فصلنامه پژوهش¬هاي دانش زمين، 28، 81-59.
طالبی، ح.، علوی، ا.، قاسمی، م ر. و شرکتی، ش.، 1398. تفاوت رژيم تنش برجا وابسته به موقعيت ساختاري و ويژگي¬هاي ژئومكانيكي، نمونه موردي در سازندهاي گچساران و آسماری، جنوب باختر ایران. فصلنامه زمین¬شناسی ایران، 49، 115-99.
لشکری، ا.، هیهات، م ر.، خطیب، م م. و نجفی، م.، 1400. سن چین‌خوردگی تاقدیس جریک در فروافتادگی دزفول براساس مطالعه هندسه چینه‌های رشدی. فصلنامه زمین‌شناسی ایران، 58، 79-69.
یوسفی، م.، موسوی، س م. و خطیب، م م.، 1398. تاثیر سازند متحرک گچساران بر سبک چین‌خوردگی و تکامل تکتونیکی تاقدیس رگ سفید در فروافتادگی دزفول جنوبی. فصلنامه زمین¬شناسی ایران، 49، 35-23.
Bahroudi, A. and Koyi, H.A., 2003. Effect of spatial distribution of Hormuz salt in deformation style in the Zagros fold-and-thrust belt: An analog modeling approach. Journal of the Geological Society, 160, 719-733.
Carruba, S., Perotti, C.R., Buonaguro, R., Calabrò, R., Carpi, R. and Naini, M., 2006. Structural pattern of the Zagros fold-and-thrust belt in the Dezful Embayment (SW Iran). Geological Society of America, Special Papers. 414, 11-32.
Cotton, J.T. and Koyi, H.A., 2000. Modeling of thrust fronts above ductile and frictional detachments: Application to structures in the Salt Range and Potwar Plateau, Pakistan. Geological Society of America Bulletin, 112, 351-363.
Dahlstrom, C.D.A., 1970. Structural geology in the eastern margin of Canadian Rocky Mountains. Canadian Petroleum Geology Bulletin,18, 332-406.
Davis, D.M. and Engelder, T., 1985. The role of salt in fold-and-thrust belts. Tectonophysics, 19, 67-88.
Erickson, S.G., Strayer, L.M. and Suppe, J., 2001. Initiation and reactivation of faults during movement over a thrust-fault ramp: numerical mechanical models. Journal of Structural Geology, 23, 11-23.
Jamison, W.R., 1987. Geometric analysis of fold development in overthrust terrains. Journal of Structural Geology, 9, 207-219.
Homza, T.K. and Wallace, W.K., 1995. Geometric and kinematics models for detachment folds with fixed and variable detachment depths. Journal of Structural Geology, 17, 575-588.
Hudleston, P.J., 1973. Fold morphology and some geometrical implications of theories of fold development: Tectonophysics, 16, 1-46.
Letouzey, J. and Sherkati, S., 2004. Salt movement, tectonic events and structural style in the central Zagros fold and thrust belt (Iran), in 24th Annual GCSSEPM Foundation, Salt-Sediments Interactions and Hydrocarbon Prospectivity, Concepts, Applications and Case Studies for the 21st Century, Soc. of Econ. Paleontol. And Mineral. Found. Houston, Tex.
MacClay, K., 2001. Advanced Structural Geology in Petroleum Exploration, 275.
Massoli, D., Koyi, H.A. and Barchi, M.R., 2006. Structural evolution of a fold and thrust belt generated by multiple de´collements: Analogue models and natural examples from the northern Apennines (Italy), Journal of Structural Geology, 28, 185- 190.
McQuarrie, N., 2004. Crustal scale geometry of the Zagros fold-thrust belt, Iran. Journal of Structural Geology, 26, 519–535.
Mitra, S., 1990. Fault-propagation folds: Geometry, kinematics evolution, and hydrocation traps. Bulletin of the American Association of Petroleum Geologists, 74, 921-945.
Mitra, S., 2002. Structural models of faulted detachment folds. AAPG Bulletin, 86, 1673–1694.
O’Brien, C.A.E., 1950. Tectonic problems oil field belt of southwest Iran. In: 18 the International Geological Congress, Proceedings, Great Britain.
O’Brien, C.A.E., 1957. Salt diapirism in south Persia. Geologie en Mijnbouw, 19, 357-376.
Pobllet, J. and McClay, K.R., 1996. Geometry and kinematics of single layer detachment folds. American Association of Petroleum Geologists Bulletin, 80, 1085-1109.
Ramsay, J.G. and Huber, M.I., 1987. The Techniques of Modern Structural Geology, 1: Strain Analysis. Academic Press, London, 307.
Ray, S.K., 1997. Plunging fault-propagation folds: a case study from the Bhutan Himalayas. In: Sengupta, S. (ed.), Evolution of geological structures in micro-to macro-scales. Chapman and Hall, London.
Sepehr, M. and Cosgrove, J.W., 2004. Structural framework of the Zagros fold-thrust belt, Iran. Marine and Petroleum Geology, 21, 829–843.
Sherkati, S. and Letouzey, J., 2004. Variation of structural style and basin evolution in the central Zagros (Izeh zone Dezful Embayment), Iran. Marine and Petroleum Geology, 21, 535-554.
Sherkati, S., Letouzey, J. and Frizon de Lamotte, D., 2006. The Central Zagros fold-thrust belt (Iran): New insights from seismic data, field observation and sandbox modeling. Tectonics, 25, 1-27.
Srivastava, D.C. and Lisle, R.J., 2004. Rapid analysis of fold shape using Bézier curves. Journal of Structural Geology, 26(9), 1553-1559.
Stabler, C.L., 1968. Simplified Fourier analysis of fold shapes. Tectonophysics, 6, 343-350.
Stowe, C.W., 1988. Application of Fourier analysis for computer representation of fold profiles: Tectonophysics, 156, 311-333.
Suppe, J., 1983. Geometry and kinematics of fault-bend folding. American Journal of Science, 283, 684-721.
Suppe, J. and Medwedeff, D.A., 1990. Geometry and kinematics of fault-propagation folding. Eclogae Geologicae Helveticae, 83, 409-454.
Suppe, J., Chou, G.T. and Hook, S.C., 1992. Rates of folding and faulting determined from growth strata. In: McClay, K. R. (ed.), Thrust Tectonics, Chapman and Hall, London, 105-122.
Turrini, F., Van-Buchem, F. and Razin, P., 2001. High resolution sequence stratigraphy of the Bangestan group in a tectonically active setting (Dezful- Izeh) Zagros-Iran, paper presented at AAPG International Conference, Barcelona, Spain.
Twiss, R.J. and Moores, E.M., 1992. Structural Geology: W. H. Freedman and Co., New York, 532.
Wallace, W. K. and Homza, T. X., 2004. Detachment folds versus fault-propagation folds and their truncation by thrust faults. In: McClay, K. R. (ed.), Thrust tectonics and hydrocarbon systems. American Association of Petroleum Geologists Bulletin, Memoir, 82, 324-355.