مرکز منطقه ای اطلاع رسانی علوم و فناوریفصلنامه زمین شناسی ایران1735-71281558202188Morphotectonic investigation of Talkhab and Tozlugol faults and formation of the Meyghan playa, Arakبررسی زمینساخت فعال گسلهای تلخاب و توزلوگل و نقش آنها در شکلگیری تالاب میقان، اراک110faلیلیایزدی کیاننسرین پیریمحمدجواد اکبریمعصومهمولاییدانشگاه بوعلی سینا20191030Meyghan playa near Arak city is located at the boundary of the metamorphic zone of Sanandaj- Sirjan and Urmia-Bazman volcanic zone. Two main faults of Talkhab and Tozlugol (Tabarte) play a key role in the formation of this basin by right lateral movement with northwest - southeast trend. In this study, morphotectonic indices were investigated to study the tectonic activity of these two faults. The measured indices include altimeter integral index, asymmetry index, stream length gradient index and basin shape factor. Investigating the relative active tectonics using the above mentioned indicators shows that Arak region has a relatively moderate to high activity. Particularly, the region between the two Talkhab and Tozlugol faults is more active than the other regions. The graben of the Meyghan Desert is formed due to the activity of the Takhab and Thouzlugol faults during the Pleistocene by right lateral transpresion zone. The southwestern side of the lake is in accordance with the Tozlugol fault. It seems that according to the morphometric studies of this area, the activity of the Talkhab fault is more than the Tozlugol fault and plays an important role in the formation of the Meyghan playa.
تالاب میقان در مرز کمربند دگرگونی سنندج - سیرجان و کمربند آتشفشانی ارومیه - بزمان قرار دارد. دو گسل اصلی تلخاب و توزلوگل (تبرته) با حرکت امتداد لغز راست بر و امتداد شمال غرب- جنوب شرق در شکلگیری این حوضه نقش اصلی دارند. در این پژوهش شاخصهای مورفوتکتونیکی برای بررسی فعالیتهای زمینساخت این دو گسل مورد بررسی قرار گرفت. از جمله شاخصهای اندازهگیری شده شاخص انتگرال ارتفاع سنجی، شاخص نبود تقارن حوضه زهکشی، شاخص شکل حوضه، شاخص گرادیان طولی رودخانه است. بررسی زمینساخت فعال نسبی با استفاده از شاخصهای فوق نشان میدهد که منطقه اراک از فعالیت نسبی متوسط تا زیاد برخودار است. بهخصوص منطقه حدفاصل بین دو گسل تلخاب و توزلوگل فعالیت بیشتری نسبت به دیگر مناطق دارند. فروافتادگی کویر میقان در اثر فعالیت گسلهای تلخاب و توزلوگل در زمان پلیستوسن بهصورت ترافشارشی راست بر شکل گرفته است. ضلع جنوب غربی دریاچه منطبق بر گسل توزلوگل میباشد. به نظر میرسد با توجه به مطالعات ریخت سنجی منطقه فعالیت گسل تلخاب نسبت به گسل توزلوگل بیشتر است و در شکلگیری دریاچه میقان نقش مهمتری ایفا کرده است.
http://geology.saminatech.ir/ar/Article/Download/19973مرکز منطقه ای اطلاع رسانی علوم و فناوریفصلنامه زمین شناسی ایران1735-71281558202188Modeling of the fold interference patterns from the northern Golpaygan metamorphic complex using MATLABمدل¬سازی الگوی تداخلی چین¬ها¬ در مجموعه دگرگونی شمال گلپایگان با استفاده از نرمافزار متلب1124faمحمدرضاشیخ الاسلامیسازمان زمین شناسی کشور202189Modeling of geological structures plays an important role in understanding the geometry of the structures and their relationships. In recent years, digital modeling using computers has attracted the attention of engineers as well as researchers in basic sciences. "MATLAB" is one of the softwares that is used with its extensive facilities for data analysis and modeling in various sciences, including structural geology. In this paper, possible models of interference patterns of the three generations of folds in metamorphic rocks of the Golpayegan area were reconstructed using the script written in MATLAB software. The required data include the attitudes of the mean axis and the mean axial planes of three consecutive generations of folds which were obtained during field measurements. Field studies show that the first and second generation folds are almost coaxial, however the third generation folds have a different axial trend. The results of modeling indicate that four classical fold interference patterns may be formed in horizontal (map view) and vertical sections in Golpayegan metamorphic rocks. Modeled fold interference patterns are closely consistent with the natural fold interference patterns observed in the outcrop and regional scales. Using the modeling, it can be determined that the different interference patterns of the folds in the northern Golpayegan metamorphic rocks are related to superposition of the related fold generations.مدل سازی ساختارهای زمین شناسی نقش مهمی در شناخت هندسه ساختارها و نیز درک روابط ساختارها با یکدیگر دارد. در سال های اخیر مدل سازی رقومی با استفاده از رایانه مورد اقبال و توجه مهندسان و پژوهشگران علوم پایه قرار گرفته است. "متلب" یکی از نرمافزارهایی است که با امکانات گسترده خود برای تجزیه و تحلیل داده ها و مدل سازی در علوم مختلف از جمله زمین شناسی ساختاری مورد استفاده قرار می گیرد. در این نوشتار مدل های ممکن از الگوهای تداخلی سه نسل چینخوردگی در سنگ های دگرگون ناحیه گلپایگان با استفاده از کد نوشته شده در نرم افزار متلب بازسازی شده اند. داده های مورد نیاز برای مدل سازی الگوهای تداخلی شامل وضعیت محور چین میانگین و صفحه های محوری میانگین مربوط به سه نسل پیاپی از چینخوردگی در سنگ-های دگرگون هستند و بر پایه اندازه گیری های صحرایی به دست آمده اند. بررسی های صحرایی نشان می دهد، چین های نسل اول و دوم تا حدودی هممحور ولی چین های نسل سوم دارای روند محوری متفاوت با دو نسل چین خوردگی پیش از خود هستند. نتایج حاصل از مدل سازی نشان می دهد شکل گیری چهار حالت کلاسیک از الگوی تداخلی چین ها در برش های افقی (دید نقشه ای) و عمودی سنگ های دگرگون گلپایگان امکانپذیر است. الگوهای تداخلی به دست آمده توسط این مدل سازی همخوانی نزدیکی با الگوهای تداخلی واقعی مشاهده شده در مقیاس رخنمون و مقیاس ناحیه ای دارند. با استفاده از مدل سازی صورت گرفته می توان تعیین کرد، الگوهای تداخلی متفاوت چین ها در مجموعه دگرگونی شمال گلپایگان مربوط به فرانهادگی کدام نسل-های چین خوردگی هستند.http://geology.saminatech.ir/ar/Article/Download/19980مرکز منطقه ای اطلاع رسانی علوم و فناوریفصلنامه زمین شناسی ایران1735-71281558202188Geology, mineralogy, alteration and potential of Lakhshak deposit, the Sistan suture zone based on geophysical studies (IP/RS)زمینشناسی، کانیشناسی، دگرسانی و پتانسیلسنجی کانسار لخشک، پهنه زمیندرز سیستان بر مبنای مطالعات ژئوفیزیکی (IP/RS)2539faنسیم حیدریان دهکردیشجاعالدین نیرومندشهرام ادیبحسینعلیتاج الدینعلوم پایهسعید میرزاییپژوهشکده علوم ¬پایه کاربردی، جهاد دانشگاهی202189Lakhshak deposit is located 28 km northwest of Zahedan in the Sistan suture zone. The rocks in the Lakhshak area predominantly consist of Eocene volcanosedimentary and metamorphosed (greenshist facies) rocks. The mineralogy of the ore is simple and consists of stibnite, pyrite, arsenopyrite, chalcopyrite, sphalerite, and electrum. The Lakhshak deposit is hosted in the shear and altered calc-shist unit which is associated with quartz, sericite-muscovite and sulfide alteration minerals. Based on geophysical studies, using induction polarity and special resistance (IP/RS) in the Lakhshak sheared area, combined with the results of geological, metamorphic and mineralization information, calligraphic calcification units, fault zones and metamorphosed areas have a high potential for Au-Sb mineralization. Therefore, using the amount of changes in specific resistance and chargeability, as well as the intensity of chargeability in the profiles, can appropriately identify the promising area for gold and stibnite mineralizations. This study indicates that the main characteristics of the geology and mineralization of the Lakhshak, such as the nature of the host rock, the form of mineralization, metamorphism and associated alterations, is similar to orogenic gold deposits.
کانسار لخشک در 28 کیلومتری شمالغرب زاهدان و در پهنه زمیندرز سیستان واقع است. عمدهترین واحدهای سنگی در گستره مورد مطالعه، مجموعهای از سنگهای رسوبی-آتشفشانی دگرشکل با سن ائوسن هستند که در حد رخساره شیست سبز دگرگون شدهاند. کانیشناسی کانسنگ ساده و شامل کانیهای استیبنیت، پیریت، آرسنوپیریت، کالکوپیریت، اسفالریت و الکتروم میباشد. میزبان اصلی کانهزایی در این گستره، واحدهای شیستی بهویژه کالکشیست با سن ائوسن است که با مجموعهای از دگرسانیهای کوارتز_ سریسیت_مسکویت و سولفید همراه میباشند. براساس مطالعات ژئوفیزیکی به روش قطبش القايي و مقاومت ويژه (IP/RS) در پهنه برشی لخشک و تلفیق نتایج بهدستآمده با اطلاعات زمینشناسی، دگرسانی و کانهزایی، واحدهای کالک شیستی، کمربندهای گسله و پهنههای دگرسان شده پتانسیل بالایی را برای کانهزایی طلا-آنتیموان نشان میدهند. بنابراین، با توجه به حدود تغييرات مقاومت ويژه و شارژپذيري در مقاطع، ميتوان گفت شدت شارژپذيري در نمیرخهای برداشتی، توانسته در مورد شناسایی کانهزایی و تعیین نواحی امیدبخش در اين گستره مناسب باشد. کانسار لخشک بر اساس ویژگیهای زمینشناختی و کانهزایی از جمله ماهیت سنگ میزبان، شکل کانهزایی، دگرشکلی و دگرسانیهای همراه، بیشترین شباهت را با کانسارهای طلای تیپ کوهزایی نشان میدهد.
http://geology.saminatech.ir/ar/Article/Download/19981مرکز منطقه ای اطلاع رسانی علوم و فناوریفصلنامه زمین شناسی ایران1735-71281558202188Calcareous nannofossil biostratigraphy in the upper part of the Garau Formation in the Sheikh Saleh section in Northwest of Kermanshah, Lurestan Province (Zagros Basin)چینه نگاری زیستی بخش فوقانی سازند گرو بر اساس نانو¬فسیل¬های آهکی در برش تاقدیس شیخ صالح در شمال غرب کرمانشاه، پهنه لرستان (حوضه زاگرس)4149faسعیده سنماری202189In this study, the upper part of the Garau Formation with a thickness of 24 m in the section of Sheikh Saleh anticline located in the northwest of Kermanshah was investigated from the calcareous nannofossils. In this section, the Garau Formation is mainly composed of medium bedded argillaceous limestone. In order to introduce the index species and biozones, 17 slides from the Garau Formation were studied, which resulted in the identification of three biozones. As a result of this study, 20 species and 15 genera of calcareous nannofossils were identified. Based on the obtained biozones, the age of the upper part of the Garau Formation in the studied section is suggested the late early Cenomanian to the late late Cenomanian. This age is corresponding to the upper part of Eiffellithus turriseiffelii Zone (CC9), Microrhabdulus decorates Zone (CC10), lower part of Quadrum gartneri Zone (CC11) from the Sissingh (1977) zonation and UC1, UC2, UC3, and lower part of UC7 from the Burnett (1998) zonation.
در این مطالعه بخش فوقانی سازند گرو به ضخامت 24 متر در برش تاقدیس شیخ صالح واقع در شمال غرب کرمانشاه از نقطهنظر نانوفسیل های آهکی مورد بررسی قرار گرفت. در این برش سازند گرو در اصل از آهک های آرژیلی متوسط لایه تشکیل شده است. بهمنظور معرفی گونه های شاخص و زیست زون ها، 17 اسلاید از سازند گرو مطالعه شد که در نتیجه منجر به تشخیص سه زیست زون شد. در نتیجه این مطالعه 20 گونه و 15 جنس از نانوفسیل های آهکی شناسایی شد. بر اساس زون های زیستی به دست آمده، بازه زمانی بخش فوقانی سازند گرو در برش مورد مطالعه از اواخر سنومانین پیشین تا اواخر سنومانین پسین پیشنهاد می شود. این بازه با بخش فوقانی زیست زون Eiffellithus turriseiffelii Zone (CC9) و Microrhabdulus decorates Zone (CC10) و بخش زیرین زیست زون Quadrum gartneri Zone (CC11) از زون بندی Sissingh (1977) و زون های زیستی UC1, UC2, UC3 و بخش زیرین زون زیستی UC7 از زون بندی Burnett (1998) هم خوانی دارد.
http://geology.saminatech.ir/ar/Article/Download/19982مرکز منطقه ای اطلاع رسانی علوم و فناوریفصلنامه زمین شناسی ایران1735-71281558202188Facies studies and depositional environment of Sahand volcanic complex (NW of Iran)مطالعات رخسارهشناسی و محیط تشکیل مجموعۀ آتشفشانی سهند (شمال غرب ایران)5168faفرهادپیرمحمدی علیشاهفنی و مهندسیاحمدجهانگیریدانشگاه تبریز202189Sahand volcanic complex is located in the south of Tabriz and east of Urmia Lake and includes an alternation of lava, igneous materials and clastic sediments that were affected by many folds and fractures. Sahand volcano is relatively young in age (Miocene to Pliocene) and its structure is somewhat intact. Consequently, where there is a good lateral continuity, facies and volcanological studies can be carried out in the upper part of the complex. Based on these studies, it was determined that the Sahand volcanic structure can be divided into four central, near, medium and distant facies. Facies studies show that the structure of Sahand Volcano was created by several explosive phases, some of which were associated with water intrusion and there was not much time between eruptions. Characteristics, such as severe welding and discoloration of pyroclastic deposits show that these units had a high temperature at the time of formation and were formed on land. Overall, Sahand volcanic eruptions were more explosive, and thus, the number of pyroclastic deposits is much higher than lava flows. In the central, near and middle facies of Sahand, no traces of younger hydrothermal activities can be found, and only in the distant facies, there is a hot spring (Bostan Abad), the relationship of which needs further study to prove the connection of these springs with the Sahand Volcano.
مجموعۀ آتشفشانی سهند در جنوب تبریز و شرق دریاچۀ ارومیه واقع شده و شامل تناوبی از گدازه، مواد آذرآواری و رسوبات تخریبی است و تحت تاثیر چین خوردگی ها و شکستگی های زیادی قرار دارد. این آتشفشان از نظر سنی به نسبت جوان (میوسن تا پلیوسن) می باشد و ساختار آن تا حدودی سالم است، به طوری که مطالعات رخساره شناسی و آتشفشان شناسی در بخش بالایی این مجموعه که پیوستگی جانبی خوبی دارد، امکان پذیر می باشد. بر اساس مطالعات رخساره شناسی در این بخش، ساختمان آتشفشان سهند را می توان در چهار رخسارۀ مرکزی، رخسارۀ نزدیک، رخسارۀ متوسط و رخسارۀ دور تفکیک کرد. مطالعات رخسارهای و آتشفشان شناسی نشان میدهد که ساختمان آتشفشان سهند در اثر چندین فاز فورانی انفجاری ایجاد شده که برخی از آنها با دخالت آب همراه بودهاند و فاصلۀ زمانی زیادی میان فورانها وجود نداشته است. ویژگیهایی چون جوش خوردگی شدید و رنگ نهشتههای آذرآواری نشان میدهد که این واحدها در زمان تشکیل، دمای بالایی داشته و در خشکی تشکیل شدهاند. در مجموع، فوران های آتشفشانی سهند بیشتر انفجاری بودهاند و به همین دلیل مقدار نهشتههای آذرآواری خیلی بیش از گدازه است. در رخسارههای مرکزی، نزدیک و متوسط سهند آثاری از فعالیتهای گرمابی جدید یافت نمیشود و فقط در رخسارۀ دور، چشمۀ آبگرم وجود دارد (بستانآباد). برای اثبات ارتباط این چشمه ها با آتشفشان سهند، به مطالعات بیشتری نیاز است.
http://geology.saminatech.ir/ar/Article/Download/19983مرکز منطقه ای اطلاع رسانی علوم و فناوریفصلنامه زمین شناسی ایران1735-71281558202188Determining the timing of folding of Jarik anticline in the Dezful embayment, based on the geometry of growth strataسن چینخوردگی تاقدیس جریک در فروافتادگی دزفول براساس مطالعه هندسه چینههای رشدی6979faاحمدلشگریمحمود رضاهیهاتدانشگاه بیرجندمحمد مهدیخطیبدانشگاه بیرجندمهدینجفیدانشگاه تحسیلات تکمیلی علوم پایه زنجان202189Determining the direction of deformation migration in the fold- thrust belts, is one of the basic aspects for understanding the structural evolution of the fold and thrust belts. By studying the timing and mechanism of deformation and compare it with different regions of a fold thrust belt, it is possible to gain a better understanding the history of the structural evolution. The timing and development of deformation in the Zagros folded belt is one of the widely studied topics and the general belief is that collision of two plates of central Iran and Arabian began in Miocene, and gradually developed from the northeast to the southwest. According to the present study, the timing of folding of the Jaril anticline in the northern of Dezful embayment is estimated to be end of Middle miocene (Serravalian). The results of the present study indicated that the onset folding of the Jarik anticline in this area coincides with the deposition of the lower Aghajari Formation.
نحوه توسعه زمانی و مکانی دگرریختی در کمربندهای چینخورده - رانده یکی از جنبههای مهم درک تکامل ساختاری این پهنههای دگرریخت شده است. با تعیین سن دگرریختی در یک ناحیه و مقایسه آن با نواحی مختلف یک کمربند چینخورده – رانده میتوان به درک بهتری از تاریخچه تکامل ساختاری آن دست یافت. زمان شروع و نحوه توسعه دگرشکلی (کوهزایی) در کمربند چینخورده -رانده زاگرس از موضوعاتی است که بهطور گستردهای بررسی شده و باور عمومی بر آن است که کوهزایی در زاگرس از میوسن با برخورد دو ورقه ایران مرکزی و عربستان شروع و از شمال شرق به جنوب غرب بهتدریج توسعهیافته است. در این پژوهش، سن چینخوردگی بر اساس مطالعه هندسه نهشته چینههای رشدی، اواخر میوسن میانی (سراوالین) برآورد شده است. نتایج این مطالعه نشان میدهد که زمان آغاز چینخوردگی تاقدیس جریک در این ناحیه همزمان با نهشته شدن آغاجاری زیرین است.
http://geology.saminatech.ir/ar/Article/Download/19984مرکز منطقه ای اطلاع رسانی علوم و فناوریفصلنامه زمین شناسی ایران1735-71281558202188Analysis of texture, structure and depositional environment of evaporites in the Kond Formation, Saran section, Central Alborz, based on field data, petrography and XRD analysisتحلیل بافت، ساخت و محیط تشکیل تبخیریهای سازند کُند در برش ساران، البرز مرکزی، براساس دادههای صحرایی، پتروگرافی و پراش پرتو ایکس8198faزینبعلیزاده عربدانشگاه شهید بهشتیمحبوبهحسینی برزیدانشگاه شهید بهشتی202189The late-Eocene Kond Formation in Saran section, Central Alborz, is a carbonate, marl, volcano-clastic and evaporite succession and the lower and upper boundaries with Karaj and Lower Red Formation is unconformable. The main thickness of the studied section consists of evaporite deposits. Based on the field studies, petrography and XRD data, these evaporite deposits are mostly consist of gypsum, anhydrite, dolomite, calcite and quartz. Field and petrographic study, imply that the gypsum and anhydrite are present in three types: primary (type one), secondary (type two) and Tertiary (type three) and dolomites are related to very early diagenesis. The primary evaporites which are laminated and layered gypsum, were deposited in a subaqueous shallow environment (salina) due to solar evaporation. Secondary evaporites with nodular texture and enterolithic and chicken-wire structures, were formed during epigenetic and shallow burial diagenesis (coastal sabkha). Moreover, tertiary evaporites with alabasterian, porphyroblastic and satin spar textures are related to burial and uplifting of primary and secondary evaporites in telogenesis and phreatic meteoric conditions. The abundance of evaporite minerals as well as other evidences of this sediments in the Saran section indicates a warm and dry climatic conditions during deposition of the Kond Formation. Due to the layered nature of evaporites of the Kond Formation in the Saran section and their association with shallow marine facies and the presence of significant thickness of volcano-clastic deposits of the Karaj Formation below these deposits, Eocene seawater and also migration of ions from older tuffs is suggested as the source of ions required for the deposition of these evaporite units.
سازند کُند به سن ائوسن پسین در برش ساران واقع در البرز مرکزی، دارای لیتولوژی کربناته، مارنی، آذرآواری و تبخیری است و مرز زیرین و بالایی آن به ترتیب با سازندهای کرج و سرخ پایینی ناپیوسته است. این برش در بخش قابلتوجهی از ضخامت خود دارای نهشتههای تبخیری است. براساس مطالعات صحرایی، پتروگرافی و دادههای پراش پرتو ایکس، نهشتههای تبخیری سازند کُند بیشتر شامل کانیهای ژیپس، انیدریت، دولومیت، آهک و کوارتز هستند. مطالعات صحرایی و پتروگرافی نمونههای مورد مطالعه، حاکی از آن است که کانیهای ژیپس و انیدریت به سه شکل اولیه (نوع اول)، ثانویه (نوع دوم) و ترشیاری (نوع سوم) تشکیل شده و دولومیتها مرتبط با دیاژنز اولیه هستند. تبخیریهای اولیه شامل لامینهها و لایههایی از ژیپس میباشند و در محیط زیرآبی کمعمق (سالینا) بر اثر تبخیر تشکیل شدهاند. تبخیریهای ثانویه با بافت نودولی، ساخت اینترولیتیک و قفسمرغی، در مرحله تدفین کمعمق (سبخای ساحلی) نهشته شدهاند. در نهایت تبخیریهای نوع سوم با بافتهای آلاباسترین، پرفیروبلاستیک و ساتناسپار در نتیجه رخنمون یافتن تبخیریهای اولیه و ثانویه در شرایط متئوریک فرآتیک به وجود آمدهاند. فراوانی کانیهای تبخیری در برش ساران، به همراه شواهد دیگر در این نهشتهها، بیانکننده گسترش شرایط آب و هوایی گرم و خشک در زمان تشکیل سازند کُند است. با توجه به لایهای بودن رسوبات تبخیری سازند کُند در برش ساران، و همراهی آنها با رخسارههای کمعمق دریایی و وجود ضخامت قابل توجه نهشتههای آذرآواری سازند کرج در زیر این نهشتهها، میتوان منبع یون لازم را برای نهشت این واحدهای تبخیری، آب دریای ائوسن و همچنین مهاجرت یونها از توفهای قدیمیتر پیشنهاد کرد.
http://geology.saminatech.ir/ar/Article/Download/19985